Innovate-motorsports LMA-3 Manuel d'utilisateur télécharger pdf (Page 22)

- 22 -

• Press the Channel button until the channel number to be calibrated is displayed

• Press and hold the Calibrate button while the channel number is still displayed

The LMA-3 will either display a lower case ‘d’ to indicate the defaults have been restored for the

selected channel or an upper case ‘E’ to indicate that the restoration could not occur. Normally

an E indicates that more than .1V is being detected on the selected input.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Innovate-motorsports LMA-3 Manuel d'utilisateur Page 22